GET A QUOTE
COMMERCIAL

Custom Box Gutters

Custom Box Gutters

GuttersSNAP-CLAD Panels feature architectural panel aesthetics as well as structural panel performance. SNAP-CLAD Panels, produced in continuous lengths, are corrective leveled to provide superior flatness and feature an optional factory-applied sealant bead for improved weather resistance. Maximum panel length is 64 feet and minimum panel length is 4 feet.
 
SNAP-CLAD Panels feature a 1-3/4” leg height and a continuous interlock for improved structural performance and wind resistance. A concealed fastener clip system allows for thermal expansion/contraction while providing extraordinary hold-down strength. Two clips are available: a standard clip for most mansard and fascia applications and a high-performance clip for roofing application and UL 90 rated assemblies.

Trim
All flashing and trim will be fabricated by manufacturer or qualified fabricator. Flashing shall be PAC-CLAD aluminum (.032-.063 gauge as specified) or PAC-CLAD steel (24 ga. or 22 ga. as specified). A 20 year, non-prorated finish warranty can be supplied covering finish performance.

Installation
SNAP-CLAD Panels are intended for use in roofing, mansard, and fascia applications. Substrates may include 5/8” (min.) plywood, nailboard insulation or equal with an underlayment of ice and water shield or 30# (min.) roofing felt applied horizontally from eave to ridge. Other substrates may include metal decking, purlins or rigid insulation in conjunction with bearing plates. A minimum 2:12 pitch is recommended in most applications. Contact Petersen for detail assistance on projects requiring lower slopes. For coastal applications, aluminum panels along with stainless steel clips must be used for warranty. Consult a local architect/engineer for compliance with local codes and conditions.

Eave Notching
Factory-produced eave notching is now available at nominal additional cost on SNAP-CLAD Panels and Redi-Roof Standing Seam Panels. Factory eave notching saves on labor cost by eliminating the need for field cutting to produce a properly trimmed eave detail.

Pac-Clad Color Chart

Kynar 500® Or Hylar 5000® pre-finished galvanized steel and aluminum
for roofing, curtainwall and storefront applications.

PAC-CLAD® Cool Colors
PAC-CLAD® Metallic Colors
Stone WhiteBone WhiteSlate GrayMusket GrayHunter GreenEvergreenHartford GreenForest Green
Stone White Bone White Slate Gray Musket Gray Hunter Green EvergreenHartford GreenForest Green
AlmondSandstoneGraniteCharcoalPatina GreenArcadia GreenHemlock GreenTeal
Almond Sandstone Granite Charcoal Patina Green Arcadia Green Hemlock Green Teal
Sierra TanTerra CottaColonial RedCardinal RedBerkshire BlueAward BlueInterstate BlueCityscape
Sierra Tan Terra Cotta Colonial Red Cardinal RedBerkshire BlueAward BlueInterstate Blue Cityscape
Medium BronzeDark BronzeBurgundyMansard BrownSlate BlueMilitary BlueMatte BlackMidnight Bronze
Medium Bronze Dark BronzeBurgundy Mansard Brown Slate Blue Military BlueMatte BlackMidnight Bronze
ZincSilverCopper PennyAged CopperChampagneWeathered Zinc
Zinc Silver Copper Penny Aged Copper ChampagneWeathered
Zinc
Due to the limitations of the on-screen viewing, this color chart is not an accurate representation of our actual colors.
Color charts and sample chips are available on request at no charge.
Steel
Aluminum
PAC-CLAD Cool Colors
Reflectivity
Emissivity
3 Yr Exposure
SRI*
24 ga.
22 ga.
.032
.040
.050
.063
Almond
0.56
0.83
0.57
64
•
•
•
•
•
Arcadia Green
0.33
0.84
0.32
33
•
•
Bone White
0.71
0.85
0.71
89
•
•
•
•
•
•
Cardinal Red
0.42
0.84
0.38
41
•
•
•
Charcoal
0.28
0.84
29
•
•
•
Cityscape
0.37
0.85
•
•
•
Colonial Red
0.34
0.85
34
•
•
•
•
Dark Bronze
0.27
0.85
25
•
•
•
•
•
•
Evergreen
0.27
0.85
26
•
•
Granite*
0.36
0.84
0.35
40
•
•
•
•
•
Hemlock Green
0.30
0.85
32
•
•
•
•
Hunter Green
0.26
0.84
26
•
•
Mansard Brown
0.26
0.84
25
•
•
•
•
•
Medium Bronze
0.30
0.85
28
•
•
•
•
•
•
Military Blue
0.29
0.84
36
•
•
Musket Gray
0.32
0.84
33
•
•
•
•
Patina Green
0.34
0.85
37
•
•
Sandstone
0.51
0.83
0.49
62
•
•
•
•
•
•
Sierra Tan
0.38
0.85
0.35
40
•
•
•
•
•
Slate Blue
0.25
0.84
26
•
•
Slate Gray
0.38
0.84
40
•
•
•
•
•
Stone White
0.61
0.86
0.59
77
•
•
•
•
•
•
Teal
0.26
0.85
26
•
•
Terra Cotta
0.37
0.84
0.37
40
•
•
•
PAC-CLAD Metallic
Aged Copper
0.27
0.83
0.25
25
•
•
•
Champagne
0.45
0.78
0.41
57
•
•
•
Copper Penny
0.45
0.82
0.42
49
•
•
•
•
Silver
0.53
0.80
0.51
59
•
•
•
•
Weathered Zinc
0.27
0.80
0.27
23
•
•
•
Zinc
0.30
0.85
0.30
30
•
•
Galvalume Plus**
0.68
0.14
0.55
57
•
PAC-CLAD Standard Colors (do not meet cool roof requirements)
Award Blue
•
•
•
Berkshire Blue*
•
Burgundy
•
•
•
Forest Green
•
•
•
•
•
Hartford Green
•
•
•
•
Interstate Blue
•
•
•
Matte Black
•
•
•
•
•
Midnight Bronze
•
*Low Gloss/Low Sheen
**Acrylic coated, non-Kynar Finish

PAC-CLAD® Metallic finishes are available from stock at a moderate extra cost. PAC-CLAD® Copper Penny is a Non-Weathering Finish.
Solar Reflectance Index calculated according to ASTM E-1980

Contact us

Let's talk about our offer

Call or write to us – let’s talk about what we can do for you!

tel

Call for services

(847) 827-1605

Get a quote
RGB_ABEdward_logo_horizontal_mono_no-bckg

Chicagoland’s premier home exteriors company specializing in roofing, siding, windows, gutters, masonry, sheet metal, carpentry and more. Over 10000+ served.

Our Services

Our Company

A.B. Edward Enterprises, Inc.
414 Mercantile Ct.
Wheeling, IL 60090
Verified License 104-014825

Hours of Operation

Monday – Friday: 7AM – 4PM
Saturday: Appts Only
Sunday: Closed

© 2003-2023 A.B. Edward Enterprises, Inc.

Proudly powered by

Advicomp